As an Amazon Associate I earn from qualifying purchases from amazon.com

The Godox AD100 Flash is Unusable for Professional Pictures


Individuals all the time have a love/hate relationship with Godox. For a lot of, they’re an inexpensive entry level to off-camera flash, providing large bang for the buck. Others see them as low cost imitations of costlier manufacturers.

I fall into the primary camp. As knowledgeable photographer, I typically shoot on location. I discover the Godox AD-series flashes splendid attributable to their small dimension and weight.

I’ve beloved all of Godox’s merchandise that I’ve used to this point. That was, till I purchased the Godox AD100 Professional (AKA the Flashpoint XPLOR 100 Professional).

There’s one large oversight on the a part of Godox, which makes the flash fairly unusable for me.

Inexperienced within the Face

For any flash to be usable for skilled images, the colour output must be pretty constant. Colours must look proper in photographs, so you could have a dependable beginning place earlier than any post-production.

Most flashes are daylight balanced, with a colour temperature of 5600k. In actuality, solely high-end flashes will reliably hit that, and cheaper flashes will be +/- 150k.

From a $300 flash, you’d count on there to be some adjustments within the colour temperature, and that may usually be acceptable.

Nonetheless, the massive concern with the ad100 is the colour solid. It’s inexperienced. Very inexperienced.

After I first observed this I assumed it should be a nasty unit. Absolutely no flash geared toward skilled photographers would have such a powerful inexperienced solid?

So, I purchased a second AD100.

I made a decision to run some assessments in my studio and examine it to my different Godox flashes.

Testing the AD100

Whereas this was in no way laboratory circumstances, I did every part I might to manage all the variables.

Two flashes have been positioned facet by facet, about 1m away from a white backdrop. I then used a flag to separate the 2 lights. No gentle was spilling from one facet to the opposite.

  • White stability was set to ‘flash’ in digital camera.
  • Shutter velocity 1/250 to kill all ambient gentle.
  • Flashes have been positioned near the background, so no gentle air pollution might happen.
  • A SpyderCHECKR was used to white stability from.

As you possibly can see, the AD100 produces a really vital inexperienced solid when facet by facet with an AD200 Professional. (Be aware: I had a spherical head on the AD200).

Examine this to the AD200 and AD300 items:

Right here, the colours are just about an identical. I additionally examined an ad600, which matched up with the ad300 and ad200.

Keep in mind that I purchased a second AD100? The colours have been precisely the identical as the primary, displaying it wasn’t a faulty unit.

Pondering I’d simply be having a nasty run of luck, I posted on a Godox group on Fb.

A number of others posted up their pattern photographs:

Courtesy of Steve Kershaw. AD100 on proper, AD200 with roundhead on left.
Courtesy of Jeff Behm.

What’s the Massive Difficulty?

If you happen to’re pondering it may be fastened in put up… properly, generally. If the AD100 was the one gentle supply for a picture, the inexperienced tint might simply be balanced out.

Nonetheless, I discover that the AD100 isn’t actually highly effective sufficient to make use of by itself. This implies I exploit it together with different Godox flashes, which creates a problem. Any gentle popping out of the AD100 can be tinted barely inexperienced.

To right this you must add pink to the photograph. Any elements of the photograph with right colour to start with will now turn into too pink.

There’s no approach that you may win. One a part of the photograph will all the time have a powerful colour solid.

The above photograph illustrates the purpose. On the pores and skin, you possibly can clearly see a distinction in tint, from one facet of the face to the opposite.

The Answer

The simple answer can be for Godox to repair this throughout manufacture. They may tint the Fresnel lens to be extra pink, which might right the inexperienced colour solid.

Or the choice is to position your individual colour correction gel on the entrance of the unit.

In my very own testing, I discovered {that a} ½ minus inexperienced filter will almost repair the colour solid.

It’s not good, but it surely’s shut sufficient to make it useable.

Discover that the AD100 remains to be barely hotter than the AD200. That’s as a result of the AD100 is spec’d at 5800k, and the AD200 at 5600k. (This may be fixable with one other gel, however I haven’t regarded into it but).

However… Why?

Godox advertises itself as a model for skilled photographers, which suggests you’d count on professional-level high quality…

On the value level, I’m not anticipating them to be good. However why launch a brand new flash within the AD collection that’s incompatible with different flashes in the identical collection?

Their very own advertising and marketing supplies typically showcase the AD100 getting used alongside the AD200 and AD300. It might be a reasonably cheap assumption to make, that they need to play properly collectively. Sadly, they don’t.

For any form of shoot the place fairly correct colours are essential, the AD100 will fall flat. Inaccurate colours should not solely annoying to take a look at however a nightmare to repair. That is very true in portrait images, the place any tint from the flashes will make the pores and skin colour look unsuitable.

Certain, it may be ‘fastened’ with a minus inexperienced gel, however why ought to an finish consumer have to repair an issue that was brought about throughout manufacturing?

Godox, please repair this.


P.S. If anybody is aware of why the flash is tinted inexperienced, please let me know!


Concerning the creator: Paul Richardson is knowledgeable headshot and private branding photographer primarily based in Stockport, England. The opinions expressed on this article are solely these of the creator. Yow will discover extra of Richardson’s work on his web site, Fb, and Instagram. This text was additionally revealed right here.



We will be happy to hear your thoughts

Leave a reply

Product Must Haves
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0