|FLM’s CP34-L4 II tripod at full top, nearly towering over your 1.83 meter (6 foot) tall reviewer.|
FLM is well-known for German ingenuity and very good development within the tripod and ball head realm, beginning with their extremely steady CB-58FTR ball head which was this reviewer’s introduction to the model. Since that evaluation, the corporate was purchased by MK Messtechnik, who proceed to design and construct the FLM heads and plates at their manufacturing facility in Stuttgart, Germany. In 2019, their tripods had been redesigned (therefore the ‘II’ suffix) and manufacturing of those new fashions was transferred to FLM’s Chinese language subsidiary. Given FLM’s popularity for stability and uncompromising engineering, bringing certainly one of their tripods to this group comes with fairly massive expectations.
With the CP34-L4 II, these expectations are initially met by the large stature of this ‘lengthy leg’ sort of ‘sequence -3 systematic’ tripod. FLM produces tripods in ‘S’ (small), ‘M’ (medium) and ‘L’ (giant) dimensions by utilizing longer or shorter leg sections between every lock, much like the alternatives provided by different producers. Nevertheless, with out a particular order, the CP34 mannequin is simply stocked and out there because the ‘L4,’ or giant, four-section mannequin, within the North American market.
Specs and what’s included
- Max. top 173.5 cm (68.3″)
- Minimal top of 11.3 cm (4.5″)
- Folds to 60 cm (23.6″) with 14 cm (5.5″) diameter
- Weighs 1.95 kg (4.3 lbs) with flat platform
- 33kg (72.7 lbs) load restrict
- Three leg angles (25° / 54° / 84° )
- 4 leg sections (34mm high leg diameter / 30 / 26/ 22mm)
- 78mm platform secured with three hex bolts
- Built-in 75mm video bowl
- Bubble stage included on apex
- Detachable 44mm mushroom ft on commonplace 3/8″ thread
- Contains instruments, directions and 40mm metal spikes
With the replace of your complete tripod line to Sequence II in 2019, FLM not solely moved tripod manufacturing from Germany to China, however the brand new sequence now all use 10-layer carbon fiber tubes, a slick black end, wider leg angles, and no middle columns on any tripod. These fashions vary from the CP26 Journey tripods and CP30 sequence with compact apexes, to the bigger CP34 and CP38, with 34mm and 38mm high tubes respectively, which have built-in video bowls as a part of their column-free apexes.
In comparison with others
|This tripod was examined and in contrast with its modular apex friends. Left to proper; ProMediaGear TR344, Actually Proper Stuff TVC-34, Sirui SR-3204, FLM CP34-L4 II, Leofoto LM-364C, Gitzo GT3543LS.|
The FLM CP34-L4 was examined and in contrast alongside tripods in the identical class of ‘Sequence 3′ (33-36mm high leg tube diameter) “Systematic’ (modular apex with detachable platform) sort, together with merchandise from Gitzo, Actually Proper Stuff, ProMediaGear, Leofoto and Sirui. Contemplating how the entire different producers on this group, besides Sirui, additionally supply longer variations of their tripods underneath evaluation, this large FLM supplies a pleasant instance of these taller choices, by way of packed measurement and supreme top
All of those tripods had been utilized in 4 seasons of sand, snow, mud, rain, and saltwater; arrange within the bog-like Atlantic salt marshes and the wind-swept Appalachian mountains. They’ve been loaded with gimbal heads, ball heads, geared and pano-heads, and as much as 4kg (8.8lb) lenses hooked up to cameras starting from APS-C to medium-format, capturing something from long-exposure landscapes to excessive telephoto birds-in-flight. The one take a look at they didn’t undergo was being rough-handled on the airport, due to pandemic journey restrictions. We’re publishing these evaluations sequentially over the approaching days, with a closing roundup to come back shortly.
Under is a relative top comparability between the FLM CP34-L4 II and a 6 foot (1.83m) photographer.
|The shiny black end of the FLM CP34-L4 II is constant all through, as is the tight development.|
The FLM CP34-L4 II actually stands proud from the remainder of the tripods it was in comparison with by advantage of its longer leg tubes, which add a formidable 23cm (9″) in top over the following tallest when absolutely prolonged, however solely 5cm (2″) extra when packed away. Gitzo, RRS, PMG and Leofoto all supply longer-legged variations of their tripods on this group, however not all obtain the identical top with such a small penalty in folded size.
Earlier mannequin tripods from FLM had the distinctive vibrant aluminum end to their machined leg locks, consistent with the assorted ball heads they make, however now those self same components are completed in a constant, clean black. Using all-metal leg locks continues to be uncommon when in comparison with the rubber-wrapped locks on nearly each competitor, and whereas they aren’t tough to know in good climate with naked fingers, we had some difficulties within the chilly.
The angle locks for every leg are thick steel with a beneficiant indent on the again, underneath the apex, permitting them to simply be pushed out to regulate every leg. Pulling them from the entrance requires extra dexterity resulting from a smaller indent on the edges, however additionally they click on forwards and backwards with a pleasant ratcheting motion, so it’s at all times straightforward to inform when the angle is locked or able to be adjusted.
Use within the area
|Typically the FLM CP34-L4’s spectacular top just isn’t wanted, however the stability of utilizing simply the highest two sections in some conditions is appreciated.|
Even if you’re not significantly tall, one of many nice benefits of this sort of a ‘supersized’ tripod over the extra typical heights is when organising on a downslope; with one or two legs absolutely prolonged, it might nonetheless retain an eye-level view to a digital camera. Or, as demonstrated within the first picture of this evaluation, capturing overhead with a protracted lens, and never needing to crouch all the way down to see a viewfinder or non-tilting again display. The minor annoyance that comes with that is that, for some individuals, the assorted heights of absolutely prolonged or closed legs could not meet their wants with out adjustment.
When the leg locks are grasped with a large hand and given 1 / 4 flip to unlock all of them, the leg tubes slide out in a quick and fluid cascade of carbon fiber that’s nearly disconcerting. No want to drag on the ends to increase them, as they’ll fly to full extension with out even a shake. In contrast to the Leofoto, the tubes themselves don’t wiggle or wobble on the best way out, and even when prolonged and nonetheless unlocked. This says the leg tubes are exactly mated to one another, however the mixture of steel locks and polished tubes is sort of slick. This makes setup very fast, in addition to adjusting the peak of every leg fairly straightforward, however takes some getting used to.
Eradicating the flat, systematic platform to disclose the properly integral video bowl requires a hex wrench and a spot for 3 lengthy bolts, so that is finest accomplished earlier than heading out into the wilderness. What the bowl supplies is a pleasant place for a leveling half ball, like FLM’s personal inexpensive unit, or one from one other producer within the 75mm measurement. There isn’t any provision for a middle column to be added to the CP-series, and the opening on the base of the bowl would limit the dimensions of the column anyhow.
Except for the additional top, the CP34-L4 was not too totally different from different tripods on this class on the subject of packing it up and transporting it. The addition of some additional centimeters of carbon-fiber tubing provides little or no to the load, and the additional packed size would solely be a problem when attempting to suit this right into a carry-on bag for air journey. Total, this ‘giant’ sort tripod from FLM signifies that any of the assorted sizes within the CP34-series shall be greater than steady sufficient for heavy gear, but mild sufficient for longer hikes. With only some areas for enchancment, FLM has created a really good set of legs for any of their ultra-stable ball heads to relaxation on.
FLM locations a excessive precedence on the upkeep of their tripods and has movies and directions on their worldwide web sites, in addition to within the included directions sheet. FLM provides substitute shims, locks and grease for under the worth of delivery, as effectively. Using a one-piece shim makes disassembly straightforward, and the machined locks are straightforward to scrub.
It’s throughout this upkeep that you’re going to discover the precision of the match of the legs.
Take a look at outcomes
Vibrations could make even the sharpest lens end up mushy, blurred pictures, and may break lengthy exposures. Within the typical use instances for this class of tripod, lowering the consequences of vibration turns into extraordinarily vital, since longer focal lengths and better resolutions amplify the consequences of any motion, and environmental vibrations like wind and water may have an growing impact on bigger legs and equipment. Digital camera vibration will be mechanically minimized with mirror lockup, digital shutters, and a distant shutter launch, whereas including weight to the underside of the tripod (with a carabiner or a tripod stone bag) will help stabilize the entire setup. Nevertheless, not all sources of vibration will be eradicated, so we examined whether or not the tripod will dampen them or transmit and replicate them to the digital camera.
The tripod legs had been absolutely prolonged, and our vibration analyzer for heavy-duty tripods (an iPad on a 3.2 kg (7 lb) cantilevered weight) was mounted on to the flat platform’s 3/8″ threaded bolt with a protracted lens plate. An industrial solenoid valve with a plastic hammer was used as a supply of vibration (a knock to the underside of 1 leg). The ensuing graph of all three accelerometers exhibits each the resistance of the tripod to the preliminary shock, in addition to the speed of decay for residual vibration throughout the tripod.
Throughout the vibration assessments, the FLM CP34-L4 was at a slight drawback by having longer leg tubes than shorter tripods, however nonetheless carried out admirably. The preliminary shock was transmitted pretty instantly, however then rapidly dampened to a low stage, and lowered to nearly nothing in a couple of seconds. Whereas this isn’t within the high of this class, it is extremely good for the dimensions and size of this FLM tripod at full extension.
FLM has constructed its popularity on the rock-solid stability of its varied heads, in addition to standing behind its merchandise. Whereas these new tripods are made in China, the identical sturdy engineering and tight development is carried over, making the CP34-L4 II a really tall part in a extremely steady system. Just a few missteps within the design are evident, such because the lacking weight hook and lack of even an non-compulsory column, however these are offset by the affordable worth and built-in video bowl. The top result’s an simply really useful various to the top-end tripods from another producer, and effectively well worth the particular order in some markets if one thing lower than the examined ‘giant’ tripod is required.
What we like
- Cheap worth for wonderful high quality and good options
- Superb vibration resistance for the dimensions
- Built-in video bowl is one much less merchandise to purchase
- Equipment are additionally fairly priced
- Spare components are straightforward to acquire
What we do not like
- Non-long legs are particular order in North America
- Middle column not out there as accent
- Leg locks exhausting to make use of in excessive chilly
- No weight hook – solely a 1/4″ gap